English  |
Ultrasonic external clamp-on type flow sensor
Clamp-on type sensor is a kind of installation way that the sensor is directly tied to the outer surface of the measured pipe to achieve the flow measurement. It has the characteristics of no connection with the diameter, simple installation, no need to stop production and no pressure loss.
Model and technical data:
Technical parameter | Standard S1 type | Standard M1 type | Standard LI type | High temperature S1H type | High temperature M1H type |
Applicable caliber | DN15-DN100 | 50-700 | 300-600 | 15-100 | 50-700 |
Material | ABS | Special high temperature material | |||
Operating frequency | 1MHz | ||||
Method of installation | V(N、W) method | V、Z method | Z method | V(N、W) method | V、Z method
|
Calibration | Whole machine paired calibration | ||||
Magnetic | Yes | No | |||
Applicable temperature | 0℃-70℃ | 0℃-160℃ | |||
Level protection | IP68（can be soaked in water，water depth ≤3 meters） | ||||
Media type | A single, uniform, steady fluid capable of transmitting ultrasonic waves, such as water, sea water, sewage, alcohol, and various oils. | ||||
Medium turbidity | ≤10000ppm, the bubble content is small | ||||
Applicable pipe | Carbon steel, stainless steel, cast iron, copper, PVC, aluminum, glass steel and other uniform and dense pipes, allowing lining. | ||||
Pipe lining | Epoxy asphalt, rubber, mortar, polypropylene, polystyrene, bakelite, PTFE etc. | ||||
Signal cable | 100 meters beyond the recommended special SEYV75-2 type single shielded cable, can be lengthened to 300 meters, wiring cable should be applied to increase the anti interference of metal casing, cable and cable and not parallel, try to avoid the frequency interference. | ||||
*All products can be customized according to customer requirements.
Weifang Jude Electronic Co.,Ltd is a manufacturer of piezoelectric ceramic components, we have been engaged in this industry for 20 years, we have our own factory, experienced technical staff, we achieves the ISO 9001 Certification.
We cooperate with the domestic first-class universities, establish a professional piezoelectric ceramic R&D room, with all this support, we can provide the best product quality and best service.
Research and development Institute:www.xjtcyjy.com
Certification:
Factory:
Shipping:
Most our products delivery to customer by air via express company, like DHL,UPS,TNT ,EMS etc.
Transport time : one week can arrival customer office after send out from us .
We have enough foam inner packing and skin packing .
Contact us:
E-mail:sales@pztceramics.com
Tel/Fax:+86 86 0536 2221236
Skype:Violet Shan
WhatsApp:+86 13165361320
QQ:1078686987
Ultrasonic external clamp-on type flow sensor
Clamp-on type sensor is a kind of installation way that the sensor is directly tied to the outer surface of the measured pipe to achieve the flow measurement. It has the characteristics of no connection with the diameter, simple installation, no need to stop production and no pressure loss.
Model and technical data:
Technical parameter | Standard S1 type | Standard M1 type | Standard LI type | High temperature S1H type | High temperature M1H type |
Applicable caliber | DN15-DN100 | 50-700 | 300-600 | 15-100 | 50-700 |
Material | ABS | Special high temperature material | |||
Operating frequency | 1MHz | ||||
Method of installation | V(N、W) method | V、Z method | Z method | V(N、W) method | V、Z method
|
Calibration | Whole machine paired calibration | ||||
Magnetic | Yes | No | |||
Applicable temperature | 0℃-70℃ | 0℃-160℃ | |||
Level protection | IP68（can be soaked in water，water depth ≤3 meters） | ||||
Media type | A single, uniform, steady fluid capable of transmitting ultrasonic waves, such as water, sea water, sewage, alcohol, and various oils. | ||||
Medium turbidity | ≤10000ppm, the bubble content is small | ||||
Applicable pipe | Carbon steel, stainless steel, cast iron, copper, PVC, aluminum, glass steel and other uniform and dense pipes, allowing lining. | ||||
Pipe lining | Epoxy asphalt, rubber, mortar, polypropylene, polystyrene, bakelite, PTFE etc. | ||||
Signal cable | 100 meters beyond the recommended special SEYV75-2 type single shielded cable, can be lengthened to 300 meters, wiring cable should be applied to increase the anti interference of metal casing, cable and cable and not parallel, try to avoid the frequency interference. | ||||
*All products can be customized according to customer requirements.
Weifang Jude Electronic Co.,Ltd is a manufacturer of piezoelectric ceramic components, we have been engaged in this industry for 20 years, we have our own factory, experienced technical staff, we achieves the ISO 9001 Certification.
We cooperate with the domestic first-class universities, establish a professional piezoelectric ceramic R&D room, with all this support, we can provide the best product quality and best service.
Research and development Institute:www.xjtcyjy.com
Certification:
Factory:
Shipping:
Most our products delivery to customer by air via express company, like DHL,UPS,TNT ,EMS etc.
Transport time : one week can arrival customer office after send out from us .
We have enough foam inner packing and skin packing .
Contact us:
E-mail:sales@pztceramics.com
Tel/Fax:+86 86 0536 2221236
Skype:Violet Shan
WhatsApp:+86 13165361320
QQ:1078686987
