Tel: +86-15165670777    Email :  sales@pztceramics.com
Home » Products » Piezo Sensor » Ultrasonic Flow Meter Sensor » Ultrasonic Flowmeter Sensor for Ultrasonic Water Meter

Product Category

loading

Share to:
sharethis sharing button

Ultrasonic Flowmeter Sensor for Ultrasonic Water Meter

Availability:

Weifang Jude Electronic Co.,Ltd is a manufacturer of piezoelectric ceramic components. We have our own factory, experienced technical staff, we cooperate with the domestic first-class universities, and establish our own piezoelectric ceramic component R&D room to develop new product and improve product quality. We will provide the best quality and best service to our customers.

Ultrasonic heat water flow sensors

Ultrasonic flow meter sensor consists of piezoelectric ceramic plate, matching materials and shielding layer, shell, whose character is on the top of the piezoelectric ceramic piece is equipped with signal processing board, the signal processing board of two electrodes respectively welding on piezoelectric ceramic piece, the side below, electrode and shielding wire connection, the signal processing board in the middle of the match on welding electronic components, on the shell of the cavity filling sealing rubber. The ultrasonic transducer, the heat meter can not only improve the consistency of the intensity of the ultrasonic transducer signal and the signal, and can make the piezoelectric ceramic chip generation and transmission signal is consistent with the frequency of ultrasonic vibration, but also has high strength, corrosion resistance, high voltage, high temperature resistant, anti-jamming, high conversion efficiency, good consistency.

Brand name:

JUDE

Model No:

JDRC-14002

Material:

PZT-5

Material for flap:

Plastic material and Stainless metal

MOQ:

Negotiable

Supply capacity:

10000 pair/month

Packing:

34×32×24mm/carton, about 5 kg/ctn

Payment:

T/T, L/C

Order Delivery Time:

Within 30 working days

Transportation:

By air via express company, like DHL, TNT, UPS, EMS

flow sensor (7)flow sensor (27)

Models and Technical Data:

Type

Center Frequency

Sensitivity

Aftershock

Return ratio

Working temperature

Capacitance

Impedance

JDRC-14001

960±5KHz

>35dB

<10Bus

>0.6mv

10℃-90℃

1200pf±10%

<100Ω

JDRC-14002

960±5KHz

>35dB

<10Bus

>0.6mv

10℃-90℃

1200pf±10%

<100Ω

JDRC-14003

960±5KHz

>35dB

<10Bus

>0.6mv

10℃-90℃

1200pf±10%

<100Ω

Material for flap: Plastic material

                             Stainless metal

图片1

Electrical specification:

type

JDRC-14002

Resonant impedance

<100Ω

Sensitivity

>35db

capacitance

1200PF±10%

Center frequency

960KHz±10KHz

Return radio

>0.6mv

Aftershock

<10Bus

Work temperature

0°C-95°C

Sealing method

Epoxy resin potting

Pressure resistance

>3.0MPa

Degree of protection

IP68

Lead position

Sensor center

Note:All materials comply with the requirements of environmental protection, while Piezoelectric ceramic exempt from lead restriction.

Package:

PCS/CTN

Packing plate

(cm)

Packing box

(cm)

Gross weight

( Kg )

Net weight

( Kg )

500

32.5×30×3.5

34×32×26

6.3

5.6

Note

1. Storage Condition:-25°C~11°C.

2. Please take Anti interference into consideration when designing driving circuit.

3. Driving voltage is suggested to be lower than 5Vpp.

4. Operating temperature:0°C~+95°C.

5. Maximum pressure endurance is 3.0MPa.

*All products can be customized according to customer requirements.

We specialize in piezoelectric ceramics and sensors for 20 years, with good quality and competitive price.

The company achieves the ISO9001 Certification.


Certification:

cert

Factory:

factory

Shipping:

Most our products delivery to customer by air via express company, like DHL,UPS,TNT ,EMS etc
Transport time : one week can arrival customer office after send out from us .
We have enough foam inner packing and skin packing .

shipping

Contact:

E-mail: sales@pztceramics.com

Tel/Fax: 86-0536-2221236

Website: www.pztceramics.com





Previous: 
Next: 
Google Translate: German | Spanish | French | Japanese | Russian